![background image](http://html2.mh-extra.com/html/icom/ic-7800/ic-7800_instruction-manual_4148585066.webp)
4-18
D
D
RTTY decode set mode
This set mode is used to set the decode USOS func-
tion, time stamp setting, etc.
• Setting contents
q
During RTTY mode operation, push [F-3•DECODE]
to select RTTY decode screen.
w
Push [F-1•<MENU2>] to select RTTY decode menu
2, then push [F-6•SET] to select RTTY decode set
mode.
• Push [F-7•WIDE] to toggle the screen size from normal
and wide.
e
Push [F-1•
Y
] or [F-2•
Z
] to select the desired set
item.
r
Set the desired condition using the main dial.
• Push [F-4•DEF] for 1 sec. to select a default condition
or value.
• Push [F-3•
Ω ≈
] to select the set contents for some
items.
t
Push [EXIT/SET] to exit from set mode.
[F-1•
Y
]
Main dial
[EXIT/SET]
[F-2•
Z
] [F-4•DEF]
[F-3•
Ω ≈
] [F-7•WIDE]
4
RECEIVE AND TRANSMIT
• RTTY decode set mode screen
Turn the letter code decoding after receiving a “space”
(USOS; UnShift On Space function) capability ON
and OFF.
• ON
: Decode as letter code.
• OFF : Decode as character code.
Selects the new line code of the internal RTTY de-
coder.
CR: Carriage Return, LF: Line Feed
• CR,LF,CR;LF : Makes new line with any codes.
• CR+LF
: Makes new line with CR+LF code
only.
Selects the diddle condition.
• BLANK
: Transmits blank code during no code
transmission.
• LTRS
: Transmits letter code during no code
transmission.
• OFF
: Turns the diddle function OFF.
Set the FFT scope waveform averaging function from
2 to 4 and OFF. (default: OFF)
Recommendation!
If you use the FFT scope waveform for tuning, use the
default or smaller number setting is recommended.
Set the color for the FFT scope waveform.
• The color is set in RGB format.
• The set color is indicated in the box beside the RGB scale.
• Push [F-3•
Ω ≈
] to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.