Icom IC-7800 Instruction Manual Download

Page: 201 / 206

16-8

Updating from the PC

Start up the IC-7800 Firm Utility.

• The window as at left appears.

Read the caution in the window carefully.

Click [Yes] if you agree and continue the firmware
updating.

Select the firmware file, that has “dat” extension

(e.g.: 7800_110.dat)

• Click […], then select the file, as well as the location.

Type the IC-7800’s IP address into “IC-7800 IP Ad-
dress” text box.

Click [Start].

The window as at left appears.
Read the precaution in the window carefully.

Click [Yes] if you want to start the firmware update.

Click to start the
firmware update

Click […] to select the firmware file.

Type the IC-7800’s IP address here.

Click to

continue

UPDATING THE FIRMWARE

Summary of Contents for IC-7800















































































































































































































Search results

Summary of Contents for IC-7800

Reviews:

Related manuals for IC-7800

Brands by name

Popular brands

Icom IC-7800, Instruction Manual

Search results

Summary of Contents for IC-7800

Reviews:

Related manuals for IC-7800

Brands by name

Popular brands