Icom IC-7800, Instruction Manual

Page: 183 / 206

14-4
D D
Command table (continued)
14
CONTROL COMMAND
Command Sub command Description
15 01 Read squelch condition
02 Read S-meter level
11 Read RF power meter
12 Read SWR meter
13 Read ALC meter
14 Read COMP meter
15 Read V
D
meter
16 Read I
D
meter
16 02 Preamp (0=OFF; 1=preamp 1;
2=preamp 2)
12 AGC selection (0=OFF; 1=Slow;
2=Mid; 3=Fast)
22 Noise blanker (0=OFF; 1=ON)
32 Audio peak filter (0=OFF;
1=320 Hz; 2=160 Hz; 3=80 Hz)
40 Noise reduction (0=OFF; 1=ON)
41 Auto notch (0=OFF; 1=ON)
42 Repeater tone (0=OFF; 1=ON)
43 Tone squelch (0=OFF; 1=ON)
44 Speech compressor
(0=OFF; 1=ON)
45 Monitor (0=OFF; 1=ON)
46 VOX function (0=OFF; 1=ON)
47 Break-in (0=OFF; 1=semi break-
in; 2=full break-in)
48 Manual notch (0=OFF; 1=ON)
4C VSC (0=OFF; 1=ON)
4D Manual AGC (0=OFF; 1=ON)
4E DIGI-SEL (0=OFF; 1=ON)
4F Twin peak filter (0=OFF; 1=ON)
50 Dial lock (0=OFF; 1=ON)
19 00 Read the transceiver ID
1A 00 Send/read memory contents (see
p. 14-9 for details)
01 Send/read band stacking register
contents (see p. 14-9 for details)
02 Send/read memory keyer con-
tents (see p. 14-9 for details)
03 Send/read the selected filter width
(SSB, CW, PSK: 0=50 Hz to
40=3600 Hz; RTTY: 0=50 Hz to
31=2700 Hz; AM: 0=200 Hz to
49=10 kHz)
04 Send/read the selected AGC time
constant (0=OFF, 1=0.1/0.3 sec.
to 13=6.0/8.0 sec.)
050001 Send/read SSB TX Tone (Bass)
level (0 =–5 to 10=+5)
050002 Send/read SSB TX Tone (Treble)
level (0=–5 to 10=+5)
050003 Send/read SSB RX Tone (Bass)
level (0 =–5 to 10=+5)
050004 Send/read SSB RX Tone (Treble)
level (0=–5 to 10=+5)
050005 Send/read AM TX Tone (Bass)
level (0 =–5 to 10=+5)
050006 Send/read AM TX Tone (Treble)
level (0=–5 to 10=+5)
050007 Send/read AM RX Tone (Bass)
level (0 =–5 to 10=+5)
050008 Send/read AM RX Tone (Treble)
level (0=–5 to 10=+5)
050009 Send/read FM TX Tone (Bass)
level (0 =–5 to 10=+5)
050010 Send/read FM TX Tone (Treble)
level (0=–5 to 10=+5)
Command Sub command Description
1A 050011 Send/read FM RX Tone (Bass)
level (0 =–5 to 10=+5)
050012 Send/read FM RX Tone (Treble)
level (0=–5 to 10=+5)
050013 Send/read SSB TX bandwidth for
wide (see p. 14-10 for details)
050014 Send/read SSB TX bandwidth for
mid. (see p. 14-10 for details)
050015 Send/read SSB TX bandwidth for
narrow (see p. 14-10 for details)
050016 Send/read speech level (0=0% to
255=100%)
050017 Send/read CW side tone gain
(0=min. to 255=max.)
050018 Send/read CW side tone gain limit
(0=OFF, 1=ON)
050019 Send/read beep gain (0=min. to
255=max.)
050020 Send/read beep gain limit (0=OFF,
1=ON)
050021 Send/read headphones output
ratio (0=0.60 to 255=1.40)
050022 Send/read headphone output
selection (0=separated, 1=mixed)
050023 Send/read AF/SQL signal output
to ACC-A (0=Main; 1=Sub)
050024 Send/read AF/SQL signal output
to ACC-B (0=Main; 1=Sub)
050025 Send/read AF output level to
ACC-A (0=0% to 255=100%)
050026 Send/read AF output level to
ACC-B (0=0% to 255=100%)
050027 Send/read S/P DIF output level
(0=0% to 255=100%)
050028 Send/read MOD output level to
ACC-A (0=0% to 255=100%)
050029 Send/read MOD output level to
ACC-B (0=0% to 255=100%)
050030 Send/read S/P DIF MOD output
level (0=0% to 255=100%)
050031 Send/read MOD input connector
during DATA OFF
(0=MIC; 1=ACC-A; 2=ACC-B;
3=MIC/ACC-A; 4=MIC/ACC-B;
5=ACC-A/ACC-B; 6=MIC/ACC-
A/ACC-B; 7=S/P DIF)
050032 Send/read MOD input connector
during DATA1
(0=MIC; 1=ACC-A; 2=ACC-B;
3=MIC/ACC-A; 4=MIC/ACC-B;
5=ACC-A/ACC-B; 6=MIC/ACC-
A/ACC-B; 7=S/P DIF)
050033 Send/read MOD input connector
during DATA2
(0=MIC; 1=ACC-A; 2=ACC-B;
3=MIC/ACC-A; 4=MIC/ACC-B;
5=ACC-A/ACC-B; 6=MIC/ACC-
A/ACC-B; 7=S/P DIF)
050034 Send/read MOD input connector
during DATA3
(0=MIC; 1=ACC-A; 2=ACC-B;
3=MIC/ACC-A; 4=MIC/ACC-B;
5=ACC-A/ACC-B; 6=MIC/ACC-
A/ACC-B; 7=S/P DIF)