![background image](http://html2.mh-extra.com/html/icom/ic-7800/ic-7800_instruction-manual_4148585018.webp)
1-8
■
Front panel (continued)
%7
MEMO PAD-WRITE SWITCH [MP-W]
(p. 8-7)
Programs the selected readout frequency and op-
erating mode into a memo pad.
• The 5 most recent entries remain in memo pads.
• The memo pad capacity can be expanded from 5 to 10
in set mode. (p. 12-16)
%8
VFO/MEMORY SWITCH [V/M]
➥
Switches the selected readout operating mode
between the VFO and memory when pushed.
(pgs. 3-3, 8-2)
➥
Transfers the memory contents to VFO when
pushed for 1 sec. (p. 5-5)
%9
KEYPAD
➥
Pushing a key selects the operating band.
• [GENE•.] selects the general coverage band.
➥
Pushing the same key 2 or 3 times calls up other
stacked frequencies in the band. (p. 3-4)
• Icom’s triple band stacking register memorizes 3 fre-
quencies in each band.
➥
After pushing [F-INP•
ENT
], enters a frequency or
memory channel. Pushing [F-INP•
ENT
] or [
Y
/[
Z
]
is necessary to end. (pgs. 3-5, 8-2)
• e.g. to enter 14.195 MHz, push [F-INP] [1.8•1] [10•4]
[GENE •] [1.8•1] [28•9] [14•5] [F-INP•
ENT
].
^0
MEMORY WRITE SWITCH [MW]
(p. 8-4)
Stores the selected readout frequency and operat-
ing mode into the displayed memory channel when
pushed for 1 sec.
• This function is available both in VFO and memory
modes.
^1
MEMO PAD-READ SWITCH [MP-R]
(p. 8-7)
Each push calls up a frequency and operating mode
in a memo pad. The 5 (or 10) most recently pro-
grammed frequencies and operating modes can be
recalled, starting from the most recent.
• The memo pad capacity can be expanded from 5 to 10
in set mode. (p. 12-16)
^2
FILTER SWITCH [FILTER]
(for MAIN band; p. 5-13)
^3
FILTER SWITCH [FILTER]
(for SUB band; p. 5-13)
➥
Selects one of 3 IF filter settings.
➥
Enters the filter set screen when pushed for
1 sec.
^4
AUDIO PEAK FILTER/TWIN PEAK FILTER
SWITCH [APF/TPF]
(for MAIN band)
^5
AUDIO PEAK FILTER/TWIN PEAK FILTER
SWITCH [APF/TPF]
(for SUB band)
➥
Push to turn the audio peak filter ON and OFF
during CW mode operation. (p. 4-6)
➥
Push to turn the twin peak filter ON and OFF dur-
ing RTTY mode operation. (p. 4-14)
• “
” appears when audio peak filter is in use.
• “
” appears when twin peak filter is in use.
➥
During CW mode operation, push for 1 sec. to
select the APF passband width from 80, 160 and
320 Hz. (p. 4-6)
TPF
APF
1
PANEL DESCRIPTION
%7 %8
^0 ^1
%9
&0
&8
&1
&5
&4
&2
&6 &3
&7
&9
^2 ^3
^5
^4
^6
^7
^9
^8