![background image](http://html2.mh-extra.com/html/icom/ic-7800/ic-7800_instruction-manual_4148585012.webp)
1-2
■
Front panel
q
POWER SWITCH [POWER]
(p. 3-2)
➥
Push to turn the transceiver power ON.
• The [POWER] indicator above this switch lights green
when powered ON.
➥
Push for 1 sec. to turn the transceiver power
OFF.
• The [POWER] indicator lights orange when the trans-
ceiver is OFF when the internal power supply is
switched ON.
w
TRANSMIT SWITCH [TRANSMIT]
Selects transmitting or receiving.
• The [TX] indicator lights red while transmitting and the
[RX] indicator lights green when the squelch is open.
e
ANTENNA TUNER SWITCH [TUNER]
(p. 10-5)
➥
Turns the internal antenna tuner ON and OFF
(bypass) when pushed momentarily.
• The [TUNER] indicator above this switch lights green
when the tuner is turned ON, goes off when tuner is
turned OFF (bypassed).
➥
Tunes the antenna tuner manually when pushed
for 1 sec.
• The [TUNER] indicator blinks red during manual tun-
ing.
• When the tuner cannot tune the antenna, the tuning
circuit is bypassed automatically after 20 sec.
r
TIMER SWITCH [TIMER]
(p. 11-4)
➥
Turns the sleep or daily timer function ON and
OFF.
• The [TIMER] indicator above this switch lights green
when the timer is in use.
➥
Enters timer set mode when pushed for 1 sec.
t
HEADPHONE JACK [PHONES]
Accepts standard stereo headphones.
• Output power: 50 mW with an 8
Ω
load.
• When headphones are connected, the internal speaker
or connected external speaker does not function.
y
ELECTRONIC KEYER JACK [ELEC-KEY]
(p. 2-4)
Accepts a paddle to activate the internal electronic
keyer for CW operation.
• You can select internal electronic keyer, bug-key or
straight key operation in keyer set mode. (p. 4-12)
• A straight key jack is located on the rear panel. See
[KEY] on p. 1-13.
• Keyer polarity (dot and dash) can be reversed in keyer
set mode. (p. 4-12)
• 4-channel memory keyer is available for your conve-
nience. (p. 4-8)
u
MICROPHONE CONNECTOR [MIC]
Accepts an optional microphone.
• See p. 15-4 for appropriate microphones.
• See p. 2-9 for microphone connector information.
(dot)
(com)
(dash)
Turn the internal power supply ON in advance. The
internal power supply switch is located on the rear
panel. (p. 3-2)
1
PANEL DESCRIPTION
q
w
e
r
t
y
u
i o
!0
!1 !2 !3
!4
!5
!6
!7
!8