1-6
■
Front panel (continued)
#5
NOISE REDUCTION SWITCH [NR]
(for MAIN
band; p. 5-18)
#6
NOISE REDUCTION SWITCH [NR]
(for SUB band;
p. 5-18)
Push to switch the DSP noise reduction ON and
OFF.
• The [NR] indicator above this switch lights green when
the function is activated.
#7
NOISE REDUCTION LEVEL CONTROL [NR]
(inner control; for SUB band; p. 5-18)
#8
NOISE REDUCTION LEVEL CONTROL [NR]
(inner control; for MAIN band; p. 5-18)
Adjusts the DSP noise reduction level when the
noise reduction is in use. Set for maximum read-
ability.
• To use this control, push the appropriate band’s [NR].
#9
NOISE BLANKER CONTROL [NB]
(outer control;
for MAIN band; p. 5-17)
$0
NOISE BLANKER CONTROL [NB]
(outer control;
for SUB band; p. 5-17)
Adjust the noise blanker threshold level.
• To use this control, push appropriate band’s [NB] switch.
$1
NOISE BLANKER SWITCH [NB]
(for MAIN band;
p. 5-17)
$2
NOISE BLANKER SWITCH [NB]
(for SUB band;
p. 5-17)
➥
Switches the noise blanker ON and OFF when
pushed. The noise blanker reduces pulse-type
noise such as that generated by automobile igni-
tion systems. This function cannot be used for
FM, or non-pulse-type noise.
• The [NB] indicator above this switch lights green
while the function is activated.
➥
Enters blank-width set mode when pushed for
1 sec.
$3
RECEIVE INDICATOR [RX]
(for MAIN band)
$4
RECEIVE INDICATOR [RX]
(for SUB band)
Lights green while receiving a signal and when the
squelch is open.
$5
LOCK INDICATOR [LOCK]
(for MAIN band; p. 5-18)
$6
LOCK INDICATOR [LOCK]
(for SUB band; p. 5-18)
Lights when the dial lock function is activated.
$7
SPLIT OPERATION INDICATOR [SPLIT]
Lights during split frequency operation.
$8
LCD FUNCTION DISPLAY
(p. 1-14)
Shows the operating frequency, function switch
menus, spectrum scope screen, memory channel
screen, set mode settings, etc.
Deep
Shallow
Increases
Decreases
1
PANEL DESCRIPTION
#5
#6
$1
$2
#8
#9
$5
$3
$6
$9
$4
$7
$8
#7
$0
%0
%1
%3
%4
%6
%2
%5
