![background image](http://html2.mh-extra.com/html/icom/ic-7800/ic-7800_instruction-manual_4148585041.webp)
3-6
D
D
Quick tuning step
The operating frequency can be changed in kHz steps
(0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable) for
quick tuning.
q
Push [TS] to turn the quick tuning function ON.
• “
Z
” appears when the quick tuning function ON.
w
Rotate the main dial to change the frequency in pro-
grammed kHz steps.
e
Push [TS] again to turn OFF the indicator.
r
Rotate the main dial for normal tuning if desired.
D
D
Selecting “kHz” step
q
Push [TS] to turn the quick tuning function ON and
OFF.
• “
Z
” appears when the quick tuning function ON.
w
Push [TS] for 1 sec. to enter tuning step setting dis-
play.
• Selected tuning steps for all modes appear.
e
Select the desired operating mode.
r
Rotate the main dial to select the desired tuning step.
t
Repeat steps
e
and
r
to select quick tuning steps
for other modes, if desired.
y
Push [EXIT/SET] to exit the setting display.
NOTE:
When entering quick tuning step set mode,
the quick tuning function must be activated first. The
main and sub bands have independent tuning step
settings.
D
D
1
⁄
4
tuning step function
When operating in SSB data, CW, RTTY or PSK, the
1
⁄
4
tuning function is available. Dial rotation is reduced
to
1
⁄
4
of normal speed when the
1
⁄
4
tuning function is
ON for finer tuning control.
➥
Push [1/4] to toggle the
1
⁄
4
tuning function ON and
OFF.
• “
” appears when the
1
⁄
4
tuning function is ON.
1
⁄
4
1
⁄
4
tuning step OFF
1
⁄
4
tuning step ON
Main dial [TS]
Select mode
[TS]
3
BASIC OPERATIONS
Quick tuning indicator
Quick tuning indicator