5-19
■
Notch function
This transceiver has auto and manual notch functions.
The auto notch function uses DSP to automatically at-
tenuates more than 3 beat tones, tuning signals, etc.,
even if they are moving. The manual notch can be set
to attenuate a frequency via the [NOTCH] control.
The auto notch can be used in SSB, AM and FM
modes.
The manual notch can be used in SSB, CW, RTTY,
PSK and AM modes.
• Auto notch indication
➥
Push [NOTCH] to toggle the notch function between
auto, manual and OFF in SSB and AM modes.
➥
Push [NOTCH] to turn the manual notch function
ON and OFF in CW mode.
➥
Push [NOTCH] to turn the auto notch function ON
and OFF in FM mode.
• [NOTCH] indicator above their switch lights green.
• Push [NOTCH] for 1 sec. to select the notch filter width
for manual notch from wide, middle and narrow.
• Set to attenuate a frequency for manual notch via the
[NOTCH] control.
• “
” appears when auto notch is in use.
• “
” appears when manual notch is in use.
While tuning the manual notch, noise may be heard.
This comes from the DSP unit and does not indicate
an equipment malfunction.
■
Digital selector
The digital selector manually adjusts the center fre-
quency of the automatic pre-selector.
The automatic pre-selector adds selectivity ahead of
the 1st mixer. This reduces intermodulation distortion
from the nearby strong signals.
The automatic pre-selector tracks the frequency tun-
ing, changing it’s resonant frequency in discrete steps.
q
Push [DIGI-SEL] to turn the digital selector ON and
OFF.
• [DIGI-SEL] indicator above their switch lights green.
w
Rotate [DIGI-SEL] control to adjust the center fre-
quency.
NOTE:
• When rotating the main dial
(or sub dial during dual-
watch or split function)
while the digital selector is ac-
tivated, mechanical noise may be heard due to the
switching noise from internal relays.
• The preamp (P.AMP1 or P.AMP2) cannot be used
while the digital selector is activated.
[DIGI-SEL] control for main
[DIGI-SEL] for sub
[DIGI-SEL] for main
[DIGI-SEL] control for sub
[NOTCH] control for main
[NOTCH] for sub
[NOTCH] for main
[NOTCH] control for sub
5
FUNCTIONS FOR RECEIVE
• Manual notch indication
