![background image](http://html2.mh-extra.com/html/icom/ic-7800/ic-7800_instruction-manual_4148585077.webp)
4-29
■
Operating AM
q
Push a band key to select the desired band.
w
Push [AM/FM] to select AM.
• “AM” indicator appears.
• After AM mode is selected, push [AM/FM] to toggle be-
tween AM and FM modes.
e
Rotate the main dial to tune the desired frequency.
• The S-meter indicates received signal strength when
signal is received.
r
Rotate [AF] to set audio to a comfortable listening
level.
t
Push [TRANSMIT] or [PTT] (microphone) to trans-
mit.
• The TX indicator lights red.
y
Speak into the microphone at your normal voice
level.
• Adjust the microphone gain with [MIC] at this step, if
necessary.
u
Push [TRANSMIT] or release [PTT] (microphone) to
return to receive.
D
D
Convenient functions for receive
• Preamp
(p. 5-9)
➥
Push [P.AMP] several times to set the preamp
OFF, preamp 1 ON or preamp 2 ON.
• “P.AMP1” or “P.AMP2” appears when the preamp 1 or
preamp 2 is ON. Main and sub have independent
preamp controls.
• Attenuator
(p. 5-9)
➥
Push [ATT] several times to set the attenuator in
6 dB steps.
• Pushing [ATT] for 1 sec. to set the attenuator in 3 dB
steps.
• “ATT” and attenuation level appear when the attenu-
ator is ON.
• Noise blanker
(p. 5-17)
➥
Push [NB] switch to turn the noise blanker ON
and OFF, and then rotate [NB] control to adjust
the threshold level.
• Noise blanker indicator (above [NB] switch) lights
when the noise blanker is ON.
• Push [NB] for 1 sec. to enter noise blanker set mode.
• Noise reduction
(p. 5-18)
➥
Push [NR] switch to turn the noise reduction ON
and OFF.
• Rotate [NR] control to adjust the noise reduction
level.
• Noise reduction indicator (above [NR] switch) lights
when the noise reduction is ON.
• Twin PBT (passband tuning)
(p. 5-12)
➥
Rotate [TWIN PBT] controls (inner/outer).
• Push [PBT CLEAR] to clear the settings.
• Notch filter
(p. 5-19)
➥
Push [NOTCH] switch to turn the manual notch
function ON and OFF.
• Rotate [NOTCH] control to set the attenuating fre-
quency.
• Notch indicator (above [NOTCH] switch) lights when
either the manual notch is ON.
• AGC (auto gain control)
(p. 5-11)
➥
Push [AGC] switch several times to select
AGC FAST, AGC MID or AGC SLOW.
➥
Push [AGC VR] to turn the AGC time constant
manual setting ON and OFF.
• Rotate [AGC] control to adjust the time constant.
• Auto tuning function
(p. 1-9)
➥
Push [AUTO TUNE] to turn the auto tuning func-
tion ON and OFF.
• The transceiver automatically tunes the desired sig-
nal within ±5 kHz range.
IMPORTANT!
When receiving a weak signal, or receiving a signal
with interference, the automatic tuning function may
not tune, or may tune to an undesired signal.
Appears
[TX] indicator
[MIC]
[RX] indicator
[AM/FM]
[AF]
Main dial
Band keys
4
RECEIVE AND TRANSMIT