9-5
■
Fine programmed scan/fine
∂
F scan
In fine scan (programmed or
∂
F), the scan speed de-
creases when the squelch opens, but the transceiver
keeps scanning. The scanning tuning step shifts from
50 Hz to 10 Hz when the squelch opens.
q
Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w
Push [F-5•SCAN] to select the scan screen.
e
Set for programmed scan or
∂
F scan as described
on previous page.
r
Push [F-1•PROG] or [F-2•
∂
F] to start a scan.
• “
” or “
” and decimal points
blink while scanning.
t
Push [F-3•FINE] to start a fine scan.
• “
” or “
” blinks
instead of “
” or “
,” respec-
tively.
y
When the scan detects a signal, the scan speed de-
creases but scan does not stop.
u
Push [F-1•PROG] or [F-2•
∂
F] to stop the scan; push
[F-3•FINE] to cancel the fine scan.
• Rotating the main dial also cancels the scan.
i
Push [F-6•RECALL] for 1 sec. to recall the fre-
quency that is set before starting the scan, if de-
sired.
[F-2•
∂
F]
[F-1•PROG]
[F-3•FINE] [EXIT/SET]
9
SCANS
