![background image](http://html2.mh-extra.com/html/icom/ic-7800/ic-7800_instruction-manual_4148585133.webp)
9-8
■
Tone scan
The transceiver can detect subaudible tones in a re-
ceived signal. By monitoring a signal that is being
transmitted on a repeater input frequency, you can de-
termine the tone frequency required to access the re-
peater.
q
Set the desired frequency or memory channel to be
checked for a tone frequency.
w
Push [AM/FM] several times to select FM mode.
e
Push [TONE] for 1 sec. to enter tone frequency
screen.
r
Push [F-1•
Y
] or [F-2•
Z
] to check the repeater tone
frequency or tone squelch frequency, respectively.
t
Push [F-6•T-SCAN] to start the tone scan.
• “SCAN” blinks while scanning.
y
When the tone frequency is detected, the tone scan
pauses.
• The tone frequency is set temporarily on a memory
channel. Program into the memory channel to store the
tone frequency permanently.
• The decoded tone frequency is used for the repeater
tone frequency or tone squelch frequency.
u
To stop the scan, push [F-6•T-SCAN].
• Push [F-4•DEF] for 1 sec. to select the default frequency.
i
Push [EXIT/SET] to exit tone frequency screen.
[F-1•
Y
] [F-2•
Z
]
[TONE]
[F-6•T-SCAN]
[F-4•DEF]
[EXIT/SET]
9
SCANS