Table 110 on page 141 shows the CE Saved Traps menu items. This menu allows the CE to add, remove,
or list saved FSC traps.
Table 110: CE Saved Traps menu
Function
Next menu
Cancel
“CE Microcode Traps menu” on page 140
Trap (4 characters that are
displayed vertically)
-
Add Saved FSC Trap
-
Rmv Saved FSC Trap
-
List Saved FSC Trap
“CE Saved FSC Trap List menu” on page 151
Note:
1. Supplemental Message Line 1: Trap set, Trap remove, or Select FSC
2. Supplemental Message Line 2: <none>
Cancel
Causes the “CE Microcode Traps menu” on page 140 to display. The address is not saved.
Trap
Allows the CE to select a specific hex value. To change the value of the nibble, select the nibble, which
causes a menu to display where you can select ‘0’ through ‘F’.
Add Saved FSC Trap
Allows the CE to add a Saved FSC trap.
Rmv Saved FSC Trap
Allows the CE to remove a Saved FSC trap.
List Saved FSC Trap
Causes the “CE Saved FSC Trap List menu” on page 151 to be displayed.
CE FSC Trap List menu
Note: Use this only when directed by your next level of support.
Table 111 on page 141 shows the CE FSC Trap List menu items. This menu allows the CE to select a
(normal) FSC to be removed from a list of (normal) FSC traps.
Table 111: CE FSC Trap List menu
Function
Next menu
Cancel
“CE Microcode Traps menu” on page 140
Note:
1. Supplemental Message Line 1: Trap set, Trap remove, or Select FSC
2. Supplemental Message Line 2: <none>
Cancel
Causes the “CE Microcode Traps menu” on page 140 to display.
CE Read Tape menu
Notes:
Virtual Operator panel 141
