manualshive.com logo in svg

IBM TotalStorage Enterprise 3592, Maintenance Information

Share
Download
IBM TotalStorage Enterprise 3592 Maintenance Information Download Page 40

Table 9: Model EH8/55F enhancements to Model EH7 (continued)
Available MES upgrade from EH7 to EH8/55F

Table 7 on page 19 provides a summary of the support and attachment capabilities of the drive models.

Table 10: 3592 drive attachment capabilities
Capability

EH7

EH8

55F

60F

Allows dual port, 1 Gbps Fibre Channel

attachment

X

X

X

Allows dual port, 2 Gbps Fibre Channel

attachment

X

X

X

Allows dual port, 4 Gbps Fibre Channel

attachment

X

X

X

X

Allows dual port, 8 Gbps Fibre Channel

attachment

X

X

X

X

Allows dual port, 16 Gbps Fibre Channel

attachment

X

Includes front Ethernet port for tasks

such as service, downloading memory

dumps, and uploading microcode

X

X

X

X

Supported by the IBM TS4500 tape

library (IBM 3584).

X

X

X

X

Supported in stand-alone rack

installations

X

X

X

X

Each 3592 drive canister is a single FRU. After the drive is varied offline to the host, each drive canister

can be removed and replaced with power ON (hot-pluggable), with minimal impact to customer

operations. Power to the drive canisters is supplied by two redundant DC power supplies. If one power

supply fails, another provides shared power until the failed supply is replaced. Each power supply is

individually hot-pluggable.
Table 11 on page 20 lists the minimum installation configurations.

Table 11: Minimum installation configuration
Installation

Minimum configuration

Rack Installation

One enclosure, one drive canister, and two power

supplies

The 3592 tape drives are installed in a rack environment, and can be mixed with EH7, EH8, 55F, and 60F

drives.

RAS characteristics

RAS is an abbreviated IBM term for the product design characteristics of Reliability, Availability, and

Serviceability.

20  IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information

Summary of Contents for TotalStorage Enterprise 3592











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands