manualshive.com logo in svg

IBM TotalStorage Enterprise 3592, Maintenance Information

Share
Download
IBM TotalStorage Enterprise 3592 Maintenance Information Download Page 52

Table 16: LED indicators for EH7/EH8/55F/60F (continued)

 2 

Drive status

Yellow • Cartridge status not

indicated

• No message or error
• POR diagnostic in

progress

• Cartridge not

present

• Message or error
• POR diagnostic

completed

• Cartridge not

present

• No message or error
• POR diagnostic

completed

Green

• Cartridge present
• No message or error
• POR diagnostic

completed

• Cartridge present
• Message or error
• POR diagnostic

completed

 3 

Ethernet

communi-

cation

1

Yellow N/A

N/A

No communications

since last POST of

drive

Green

N/A

Ethernet

communication

activity

 4 

Information

2

Blue

N/A

N/A

N/A

 5 

Port 0 - Fibre

Channel

activity

Yellow N/A

Fibre Channel

connections are good;

not ready to transmit

• No light is detected

through Fibre

Channels

• Fibre Channel cable

is disconnected

• Port is not in use
• Fibre wrap plug is

installed on the port

• Drive was not

returned to operator

mode (is still in CE

offline mode or CE

online mode)

Green

Fibre Channel

connections are

detecting light, but no

data is being

transferred. Wrap

tools are installed or

drive canister is offline

to host.

Fibre Channel

connections are good;

data is being

transferred

 6 

Port 1 - Fibre

Channel

activity

Yellow N/A

Fibre Channel

connections are good;

not ready to transmit

Green

Fibre Channel

connections are

detecting light, but no

data is being

transferred. Wrap

tools are installed or

drive canister is offline

to host.

Fibre Channel

connections are good;

data is being

transferred

Notes:

1. The Ethernet Communication LED is always off unless the CE or the customer is connected to the

Ethernet port at the front of the enclosure.

2. The Information LED is not lit. However, even if it is, it is not a cause to replace the drive. If it is on,

the fan is probably running at full speed.

Power supplies

32  IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information

Summary of Contents for TotalStorage Enterprise 3592











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands