background image

Improved Data Recording Format

An improved data recording mode that can increase the effective data capacity and the effective data

rate when enabled and started.

initial microprogram load (IML)

The action of loading a microprogram from an external storage to writable control storage.

initiator

The component that runs a command. The initiator can be the host system or the tape controller.

INST

Installation.

interblock gap (IBG)

An area on a data medium to indicate the end of a block or physical record.

interface

A shared boundary. An interface might be a hardware component to link two devices or it might be a

portion of storage or registers accessed by two or more computer programs.

interposer

The part that is used to convert a 68-pin connector to a 50-pin D-shell connector, for example.

intervention required

Manual action is needed.

INTRO

Introduction.

I/O

Input/output.

IOP

Input/output processor.

IPL

Initial program load.
Synonymous with IML.

IPP

IBM method of passing keys.

iSystem

Deprecated IBM term for AS/400 (System i) products, which were formerly known as iSeries products.

IT

Impedance transformer.
Information technology.

ITST

Idle-time self-test.
K

KB

Kilobytes.

kilo

Prefix for 'thousand' (10

3

).

kilobytes (KB)

One thousand bytes.
L

LAN

Local area network.
In a comparison of geographic breadth, a LAN is a computer network that is smaller than a MAN or a

WAN.

308  IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information

Summary of Contents for TotalStorage Enterprise 3592











































































































































































































































































































































































Reviews: