manualshive.com logo in svg

IBM TotalStorage Enterprise 3592, Maintenance Information

Share
Download
IBM TotalStorage Enterprise 3592 Maintenance Information Download Page 36

Table 6: Supported TapeAlert flags. The No. column is presented in decimal format, not hexadecimal format.

(continued)
No. Flag

Description

Customer action

CE action

31

Hardware B

This flag is set when the tape

drive fails its internal Power-On

Self-Test (POST), and is not

cleared until the drive is powered

OFF.

Call for Service.

See Note 1.

32

Interface

This flag is set when the tape

drive detects a problem with the

fibre interface. It is cleared when

the drive is powered OFF, or a

successful microcode update is

completed.

Call for Service.

See Note 1.

33

Eject media

This flag is set when a failure

occurs that requires the tape

cartridge to be ejected from the

drive and retried. The flag is

cleared when the cartridge is

ejected.

Try different media. Try different media. If problem

persists, go to “FID 87 or F2 -

Isolating fault between media

and hardware” on page 243.

34

Download

fail

This flag is set when an FMR

image is unsuccessfully

downloaded to the tape drive

with the fibre or RS-422 (LDI)

interface. It is cleared when the

drive is powered OFF or a

successful microcode update is

completed.

Call for Service.

Try microcode update

procedure again (see

“Microcode maintenance” on

page 217).

36

Drive

temperature

Drive temperature sensor

indicates that the drive is too hot.

It is cleared when the drive is

powered off.

Call for Service.

Go to “FID 85: Drive canister”

on page 252.

37

Drive voltage This flag is set when the drive

detects power supply voltages

outside of the specified voltage

limits. It is cleared when the

drive is powered OFF.

Call for Service.

See Note 1.

38

Predictive

failure

A hardware failure of the tape

drive is predicted.

When it is

convenient, call for

Service.

See Note 1.

39

Diagnostics

required

This flag is set when a tape

cartridge or drive FID or 

ATTN

DRV

 message is posted.

Call for Service.

See Note 1.

50

Lost

statistics

Media statistics were lost at

some time in the past.

No action that is

required. Status

only.

None

16  IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information

Summary of Contents for TotalStorage Enterprise 3592











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands