manualshive.com logo in svg

IBM TotalStorage Enterprise 3592, Maintenance Information

Share
Download
IBM TotalStorage Enterprise 3592 Maintenance Information Download Page 171

Table 127: CE DRV Features menu
Function

Next menu

Cancel

“CE Drv Options menu” on page 119

(Drive Model Number) Rack

Mount

“CE Save Data menu (Root, Port, and Node names)” on page 132

Cancel

Causes the “CE Drv Options menu” on page 119 to display.

(Drive Model Number) Rack Mount

CE can select this option if 3592 drive is installed in a rack or if it is a standalone drive.

CE Saved FSC Trap List menu
Note: Use this only when directed by your next level of support.
Table 128 on page 151 shows the CE Saved FSC Trap List menu items. This menu allows the CE to select

a saved FSC to be removed from a list of saved FSC traps.

Table 128: Saved FSC Trap List menu (CE Offline Mode)
Function

Next menu

Cancel

“CE Saved Traps menu” on page 140

Note:

1. Supplemental Message Line 1: Trap set, Trap remove, or Select FSC
2. Supplemental Message Line 2: <none>

Cancel

Causes the “CE Saved Traps menu” on page 140 to display.

Note: Only 3 saved traps can be active at a time.

CE Online Mode menus

CE Online Mode menu allows the CE and customer to use the drive concurrently. Only limited operations

are allowed. Some panels have partial displays, such as display sensors. The CE operations might

interfere with customer operation.

To access the following menus, press Change Mode  , then select CE Online Mode.

Attention: Any accidental operation of Reset can severely affect customer operation.

CE Online Options menu

The following menus are accessed by pressing Change Mode  .
Table 129 on page 151 shows the menu items.

Table 129: CE Online Options menu (CE Online Mode)
Function

Next menu

Logs…

“CE Logs menu (CE Online Mode)” on page 152

Virtual Operator panel  151

Summary of Contents for TotalStorage Enterprise 3592











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands