IBM ThinkPad 365X User Manual Download Page 233

Page: 233 / 308

Troubleshooting

PC Card Problems

Problem

Action

PC Card Director does not
recognize your PC Card.

Verify that:

If you are using the EMS driver under DOS:

– You have set the correct value for the

/MA=mmmm-nnnn

parameter in the

Resource Map Utility. In the EMS driver, check the UMB area used for
PCMCIA under the

X=mmmm-nnnn

parameter; then use that range to set

the

/MA

parameter in the Resource Map Utility.

Your PC Card supports the PCMCIA Release 2.0 and 2.01. Refer to the

manual that came with your PC Card.

If your PC Card does not support the PCMCIA Release 2.0 and 2.01, you
cannot use PC Card Director. Contact your PC Card supplier.

Your PC Card is working by following the diagnostic instructions for your PC

Card, if any.

The PC Card is
recognized by PC Card
Director, but the “Not
Ready” message is
shown.

Verify that:

The PC Card enabler is installed.

Refer to the manuals supplied with your PC Card.

If you are using the EMS driver under DOS:

You have set the correct value for the

/MA=mmmm-nnnn

parameter in the

Resource Map Utility. In the EMS driver, check the UMB area used for
PCMCIA under the

X=mmmm-nnnn

parameter; then use that range to set the

/MA

parameter in the Resource Map Utility. If you are using Windows, also

set the value for the

EMMEXCLUDE=

parameter in the SYSTEM.INI file.

The resources for the PC Card are correctly reserved.

Refer to “Checking the Allocated Resources for the PC Card” on page 253.

Chapter 8. Solving Computer Problems

211

Summary of Contents for ThinkPad 365X





















































































































































































































































































































Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands

IBM ThinkPad 365X, User Manual

Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands