IBM ThinkPad 365X User Manual Download Page 225

Page: 225 / 308

Troubleshooting

Problem

Cause or Action

The computer has
problems such as a
broken keylock or a
defective indicator lamp.

Have the computer serviced.

The computer does not
turn off with the power
switch.

If the suspend lamp is turned on, connect the AC Adapter or install a fully
charged battery pack in the computer; then resume operation.

The computer does not
start from a diskette.

Check that the startup sequence in Easy-Setup is set to start the computer from
the diskette drive (see page 41).

The keyboard cannot be
opened.

Check that a Kensington lock or compatible lock is not in use. See page 102.

Note: Slide the keyboard latches toward the front to open the keyboard.

Chapter 8. Solving Computer Problems

203

Summary of Contents for ThinkPad 365X





















































































































































































































































































































Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands

IBM ThinkPad 365X, User Manual

Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands