IBM ThinkPad 365X User Manual Download Page 167

Page: 167 / 308

Installing IBM OS/2 Warp

Avoiding Video Problems When Installing OS/2 Warp

If you have a video problem when installing OS/2 Warp, do the
following:

Important

Make sure you create the Video Graphics Adapter Fix Diskette
for OS/2 Warp using the Diskette Factory program

before

reinstalling OS/2 Warp. Have the diskette ready when doing the
procedures below.

Make sure you have created the OS/2 Warp Video Fix
Diskette using the Diskette Factory program.

Start installing OS/2 Warp.

When prompted to remove Diskette 1 and restart the
computer, instead insert the OS/2 Installation Diskette and
restart the computer.

Continue the installation, following the instructions on the
screen, until the “Welcome” screen appears.

Press F3 and go to the command prompt.

Insert the OS/2 Warp Video Fix Diskette into the diskette
drive.

Type the following command at the command prompt:

a:\repvga c

where

c is the drive where OS/2 Warp is installed. The video

driver files will be replaced.

Remove any diskettes from the diskette drive; then restart the
computer.

The second half of the Warp installation continues.

When selecting a video driver, select a VGA display driver.

When prompted to remove any diskettes and restart the
computer, instead insert the OS/2 Installation Diskette and
restart the computer.

Chapter 7. Installing Software

145

Summary of Contents for ThinkPad 365X





















































































































































































































































































































Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands

IBM ThinkPad 365X, User Manual

Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands