IBM ThinkPad 365X User Manual Download Page 85

Page: 85 / 308

Charging the Battery Pack

The following procedure describes how to recharge the battery pack
with the AC Adapter when the computer is turned off.

Turn off the computer and open the keyboard.

Install the new or discharged battery pack into the computer.

Close the keyboard.

Connect the AC Adapter to the computer.

The system status indicators show the following:

Color

Meaning

On (green)

The battery pack is being charged.

Off

The battery pack is fully charged.

Chapter 4. Using Battery Power

Summary of Contents for ThinkPad 365X





















































































































































































































































































































Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands

IBM ThinkPad 365X, User Manual

Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands