IBM ThinkPad 365X User Manual Download Page 171

Page: 171 / 308

Installing the ThinkPad Features Program for OS/2 Warp

Note:
When installing an operating
system, you need to install the
ThinkPad Features program.

To install the ThinkPad Features program:

Start OS/2.

Insert Utility Diskette 2 into the diskette drive.

Install the ThinkPad System Management device driver:

a) Open OS/2 System and then System Setup.

b) Select Device Driver Install.

c) Click on the Install... button.

d) Click on ThinkPad System Management Device Driver;

then click on OK.

Open the OS/2 screen command prompt.

Remove Utility Diskette 2 from the diskette drive, and insert
Utility Diskette 1.

Go to the

prompt and type

INSTALL2

; then press Enter.

Follow the instructions on the screen.

Install the Windows ThinkPad Features program for the
WIN-OS/2 session:

a) Exit the OS/2 screen; then open the WIN-OS/2 full screen.

b) Follow the instructions in “Installing the ThinkPad Features

Program for Windows 3.11” on page 169.

Install the DOS ThinkPad Features program to use the PS2
commands.

a) Exit the WIN-OS/2 full screen; then open the DOS full

screen.

b) Follow the instructions on page 161.

You have completed the installation of the ThinkPad Features
program.

If you want to continue to install all device drivers, continue with
“Installing the PCI-IDE Bus Master Driver for OS/2 Warp” on
page 150.

Chapter 7. Installing Software

149

Summary of Contents for ThinkPad 365X





















































































































































































































































































































Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands

IBM ThinkPad 365X, User Manual

Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands