IBM ThinkPad 365X User Manual Download Page 30

Page: 30 / 308

Getting Started

DANGER

The battery pack provided with your computer
contains a small amount of harmful substances.
To avoid possible injury:

Keep the battery pack away from fire.
Do not expose the battery pack to water or

rain.

Do not attempt to disassemble the battery

pack.

Avoid mechanical shocks to the battery.
Always use battery packs recommended by

IBM.

Keep the battery pack away from children.

When disposing of the battery, comply with local
ordinances or regulations or your company's
safety standards.

Install the battery pack with the strap-side up and press it
firmly into the connector.

(Do

and

Close the keyboard by sliding the latches to the front and
lowering the keyboard into place.

(Do

and

IBM ThinkPad 365X/365XD:

User's Guide

Summary of Contents for ThinkPad 365X





















































































































































































































































































































Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands

IBM ThinkPad 365X, User Manual

Search results

Summary of Contents for ThinkPad 365X

Reviews:

Related manuals for ThinkPad 365X

Brands by name

Popular brands