Device Space Problems
Problem
Action
The IDE device in the
device space does not
work.
Verify that:
1. The device is engaged firmly to the device space connector.
Remove and reinstall the device.
2. Correct setup (including resource assignment and device driver
installation) was done when you installed the device.
3. No more than two IDE devices are installed including the devices
on the UltraBay II tray.
4. IDE 2 is enabled.
5. The mode selection has been set correctly.
The SCSI drive in the
device space does not
work.
Verify that:
1. The device is engaged firmly to the device space connector.
Remove and reinstall the device.
2. Correct setup (including resource assignment and device driver
installation) was done when you installed the device.
3. The terminator is disabled.
Run the test
“SCSI Subsystem Test” on page 6-23 .
6-16
IBM ThinkPad SelectaDock III User's Guide
Summary of Contents for SelectaDock III
