IBM SelectaDock III, User Manual, Page: 100 / 134

Running Tests
The diagnostic test program for internal devices is provided in the
Easy-Setup program contained in your computer.
Internal Drive Test
The Easy-Setup test program on the computer is used to test the
device in the SelectaDock system. This section explains how to
select the devices in the SelectaDock system. If you need
instructions to invoke the test, or interpret the test results, see the
user's guide for your computer.
The following figure shows an example of the test devices selection
menu. Devices in the SelectaDock system closed by a rectangular
box
1
.
The testable devices in the SelectaDock system are:
Hard disk drive in the UltraBay or the UltraBay II
Diskette drive in the UltraBay or the UltraBay II
PCMCIA slots
CD-ROM drive in the UltraBay or the UltraBay II
DVD in the UltraBay II
USB port
If an error is detected, an error code is displayed near the device
icon on the screen. You can find the error description of the error
codes in the user's guide for your computer.
6-22
IBM ThinkPad SelectaDock III User's Guide