IBM SelectaDock III, User Manual, Page: 54 / 134

Setting Up a SCSI Device
After installing a SCSI device in the SelectaDock III system,
configure your computer by referring to section or manual applicable
for the operating system you use:
Note:
For Windows NT user and use other drive than CD-ROM and
hard disk drive that does not depend on the Adaptec SCSI
hard disk peripheral, get the 2940 driver from the following
Web. site:
http://www.adaptec.com/
For DOS and Windows 3.1 Appendix A .
For other operating systems The manual supplied with
the operating system or SCSI device.
For Windows 95
To update the SCSI controller, do as follows:
1
Double-click on My Computer, Control Panel, and System.
2
Click on the Device Manager tab.
3
Click on the
+
mark of the SCSI Controller selection.
A submenu appears.
4
Select Adaptec AHA-294X/78XX PCI SCSI Controller by
clicking on it; then click on the Properties button.
5
Click on the Driver tab.
6
Click on Update Driver.
7
Insert the option diskette in the diskette drive; then make sure
that Yes (Recommended) is selected.
8
Click on Next.
3-6
IBM ThinkPad SelectaDock III User's Guide