IBM SelectaDock III, User Manual

Page: 30 / 134

Handling Internal Options
DANGER
Before you install or remove the option, unplug the power cord.
CAUTION
The CD-ROM drive uses a laser system. To ensure correct use of this product, carefully
read the manual that came with the CD-ROM drive and keep the manual for future
reference. If the unit requires maintenance, have it serviced by authorized personnel.
Use of controls, adjustments, or procedures other than those specified may result in
hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not open the enclosure.
Attention
Do not open the static-protective package containing the option until you are instructed to do so.
Static electricity can damage the option.
When you are instructed to install the option, observe these precautions as you open the
static-protective package:
Touch the static-protective package containing the option to a metallic portion of the
SelectaDock III for at least 2 seconds. This action reduces the static electricity from the
package and from your body.
Do not touch any exposed circuitry on the option.
Prevent other people from touching the option.
Limit your movement. Movement can cause static-electricity buildup.
Always handle the option carefully and by its edges.
If you
must put the option down after it has been removed from the package, place the option
on the static-protective package on a level surface. Do not place the option on a metal table.
If the SelectaDock III system has a dust cover over the UltraBay, remove it.
2-2
IBM ThinkPad SelectaDock III User's Guide