IBM SelectaDock III, User Manual, Page: 43 / 134

6
Drive in the screw that held the metal bracket to secure the
adapter card in the socket.
If you are installing the wake-on LAN card, connect the
wake-up signal cable (brown) and power cable (white) to each
connector on the LAN card.
7
Attach and close the rear cover.
8
Reconnect the cables and power cord.
9
Attach the connector cover to the SelectaDock III system.
You have finished installing the adapter card.
After attaching the adapter card, go to Chapter 3 to configure the
system.
Chapter 2. Installing Options
2-15