IBM SelectaDock III, User Manual

Page: 52 / 134

7
Select the ThinkPad Configuration icon.
8
Click on the Docking Station ( ) button.
9
Select Enable IDE device in the docking station.
10
Select 3rd IRQ.
11
Click on OK; then close the ThinkPad Configuration program.
12
Reboot the computer to make the change effective.
For the ThinkPad 770 with Windows NT and OS/2 Warp user, do
as follows:
1
Select the ThinkPad folder.
2
Select the ThinkPad Configuration icon.
3
Click on the Docking Station ( ) button.
4
Click on Advanced.. button.
5
Click on PCI Device Setup button.
6
Set only the 1st IRQ in the next window.
7
Click on OK; then close the ThinkPad Configuration program.
8
Reboot the computer to make the change effective.
9
Select the ThinkPad folder.
10
Select the ThinkPad Configuration icon.
Note:
Do not use IRQ 11 and IRQ 15. You have to disable a
device or port to set an IRQ for the SelectaDock III system.
When you select an IRQ, a hardware conflict message
appears. Disable the device currently assigned to that IRQ.
3-4
IBM ThinkPad SelectaDock III User's Guide