IBM SelectaDock III, User Manual

Page: 27 / 134

Notes:
a) x can be any number.
b) The message “Version Conflict” might appear on the screen.
Answer Yes to the prompt “Do you want to keep this file?.”
7
In Windows 95, double-click on My computer, Control Panel,
and System.
8
Click on the Hardware Profile tab.
9
Make sure the new profile, Dock x, is created. Select the
Device Manager tab and make sure that the new devices are
displayed in the device list.
If Dock x is not created, repeat from step 1 on page 1-15.
Once the new hardware profile Dock x has been created, you
can dock or undock your computer in hot or warm mode.
Note:
If the symbol “!” or “X” appears next to a device symbol, a
resource conflict might have occurred. For the system
resource assignment, go to “System Resources Assignment”
on page 3-9.
Cold Undocking
This procedure describes how to undock your computer from the
SelectaDock system when the computer power is turned off.
1
Turn off your computer.
2
Turn the security key to the eject position to eject the computer.
3
Grasp the computer and lift it out.
You have completed the cold undocking.
Chapter 1. Introduction
1-17