IBM SelectaDock III, User Manual

Page: 77 / 134

Limitations
Item Limitation
Using a diskette drive Even though the SelectaDock III system can support either
external or internal diskette drives, you can use only one at a
time.
Attention
If you connect two diskette drives and attempt to use both of
them, data on both of diskettes will be lost.
Using ISA or PCI adapter
cards Consider card compatibility when you purchase an ISA or a PCI
adapter card.
The SelectaDock III system does not support the REFRESH
signal for an ISA bus when the computer is attached. Therefore
the following ISA adapter cards are not supported:
IBM-Multi Port Card (part number 00F5529)
IBM-Multi Port 2 Card (part number 33F8791)
DRAM memory cards
ISA cards that use the REFRESH signal to detect whether
the bus is working
ISA cards that use the REFRESH signal as a clock counter
Suspend and resume
functions The suspend and resume function are not supported when
you dock the ThinkPad 760 or 765 in the SelectaDock
system.
If you are using DOS or Windows 3.1, the suspend and
resume functions are not supported if an ASPI8IBM.SYS
(SCSI) driver is loaded.
If you are using Windows 95, the suspend and resume
functions are not supported when an AIC-7860 (SCSI) driver
is loaded by Windows 95 and if it is enabled by the device
manager (when the checkbox is selected).
The suspend and resume functions are not supported if an
adapter card or PC Card is installed in a card slot.
Chapter 5. Hints, Tips, and Limitations
5-5