IBM SelectaDock III, User Manual, Page: 87 / 134

2
Turn on the external devices, and then the computer.
Note:
This sequence is important because the computer
checks during its power-on self-test that the devices are
powered on and ready.
Did the Attention indicator on the SelectaDock III panel
turn on or blink?
Yes An incorrect docking status has been detected. Go to
“Setup Problems” on page 6-13, and take the actions
provided.
No Go to the next question.
Did the Power-On indicator on the SelectaDock system
panel turn on?
Yes Go to the next question.
No Go to “Setup Problems” on page 6-13, and take the
actions provided.
Did the boot operation finished as expected?
Yes Go to “Troubleshooting Guide” on page 6-10.
No Go to “Startup Problems” on page 6-14, and take the
actions provided.
Chapter 6. Troubleshooting
6-9