IBM SelectaDock III, User Manual, Page: 28 / 134

Hot or Warm Docking for Windows 95
Docking
In the boot process after cold docking, the operating system tries to
set a configuration including the devices installed in the SelectaDock
system. After the configuration has been set up, you can dock your
computer in hot or warm mode. The SelectaDock system devices
immediately become available to your computer.
Undocking
To use hot or warm undocking for Windows 95, do the following:
1
Request the eject by either of the following:
Select Eject PC in the Start menu.
or
Turn the security key to the eject position and release the
key.
An eject request is made to the operating system.
Considerable time may be required to complete the eject
process.
2
When you hear the beep sound, turn the security key to the
eject position again to eject the computer from the SelectaDock
system.
Note:
If the operating system rejects the request, messages
appear on the screen explaining the reason. In this
case, use cold undocking.
Note:
To see if the eject process has completed, click on Start. If
Eject PC appears, undocking is still in progress. If not, the
eject process has completed.
1-18
IBM ThinkPad SelectaDock III User's Guide