IBM SelectaDock III, User Manual

Page: 14 / 134

The SelectaDock III system works with the following combinations:
SelectaDock System Combination
ThinkPad 760E/760ED
ThinkPad 760EL/760ELD
ThinkPad 760XD/760XL ThinkPad 765D
ThinkPad 765L ThinkPad 770
SelectaDock III SelectaBase 770 No No Yes
SelectaDock
Base Model I Yes Yes No
Note: The SelectaBase 770 and the SelectaDock Base Model I are port replicators. Either of them provides
you the full docking system functions with this SelectaDock III. The SelectaDock III system needs one of these
SelectaBases. Which one you need depends on the model of your ThinkPad computer.
Features of the SelectaDock III system
When you dock your ThinkPad to the SelectaDock system, your
total system will have the following additional features.
Two PCI/ISA shared slots and one PCI slot
A half height bay for IDE or SCSI device
An UltraBay II tray for one UltraBay II device
An UltraBay tray for an UltraBay device (option)
Two USB connectors
Two (type-II) PCMCIA slots
One SCSI connector
Hot and warm docking support
Capability for sharing the SelectaDock system
Security for the ThinkPad computer, devices inside the
SelectaDock system and the SelectaDock system itself.
Note:
Attaching or detaching your computer to or from the
SelectaDock system is called docking or undocking.
A swappable device for the ThinkPad 770 computers.
A “ThinkPad 760 UltraBay Options Tray for SelectaDock III” can
be purchased separately.
A swappable device for the ThinkPad 760 computers.
1-4
IBM ThinkPad SelectaDock III User's Guide