IBM SelectaDock III, User Manual

Page: 105 / 134

Note
If you change your SCSI hardware configuration, you should
reinstall Adaptec EZ-SCSI. This allows EZ-SCSI to adjust your
configuration files so the appropriate device drivers and other
files are loaded into memory.
For example, if you reinstall EZ-SCSI after connecting a CD-ROM
drive to your SCSI port, the CD-ROM device driver is added to
your configuration files and the correct drive letter is assigned to
the new device.
Installing EZ-SCSI for Windows
Follow these steps to install Adaptec EZ-SCSI for Windows:
Note:
Dock your computer to the SelectaDock system; then follow
the instructions depending on the operating system.
1
Start Windows.
2
Insert the SelectaDock option diskette into the diskette drive.
3
Select File and Run from the Program Manager menu bar.
When the Run dialog box appears, enter
a:\setup
if you are
using the A drive, or
b:\setup
if you are using the B drive.
4
Click on OK. A message appears while Adaptec EZ-SCSI
loads into memory.
5
Click on Install Adaptec EZ-SCSI to continue with the
installation.
Click on Help on any screen to view more information. To
close a Help window, select File and Exit, or double-click on
the control-menu box in the upper left corner of the window.
6
Follow the instructions that appear on the screen. Click on
Continue, Install, or OK to continue with the installation and
accept the EZ-SCSI default values. Follow the instructions on
Appendix A. Using the SCSI Support Software
A-3