IBM SAN Volume Controller, Hardware Maintenance Manual

Page: 8 / 334

54. Installing the front of a SAN Volume
Controller 2145-CF8 slide rail in the front of
the rack .
. . . . . . . . . . . . . 60
55. SAN Volume Controller 2145-8A4 support-rails
installation kit. . . . . . . . . . . . 60
56. A closed rail-locking carrier at the front of the
support rail for the SAN Volume Controller
2145-8A4
. . . . . . . . . . . . . 61
57. An open rail-locking carrier at the rear of the
support rail for the SAN Volume Controller
2145-8A4
. . . . . . . . . . . . . 62
58. Aligning the pins on the left front support rail
for the SAN Volume Controller 2145-8A4 with
the front mounting flange .
. . . . . . . 63
59. SAN Volume Controller 2145-8G4 support rails
installation kit. . . . . . . . . . . . 64
60. Inserting the right slide rail into the rear rack
mounting flange . . . . . . . . . . . 64
61. Extending the right slide rail . . . . . . . 65
62. Attaching the latch strike to the front of the
slide rail . . . . . . . . . . . . . 65
63. Retracting the latch-lock carrier . . . . . . 66
64. Opening the front latch-lock carrier assembly 66
65. Opening the back latch-lock carrier assembly 67
66. Installing the front end of the rail . . . . . 67
67. Closing the latch-lock carrier assembly . . . 68
68. Removing the SAN Volume Controller
2145-CF8 cover . . . . . . . . . . . 69
69. Removing the SAN Volume Controller
2145-8A4 cover . . . . . . . . . . . 70
70. The SAN Volume Controller 2145-8G4 with fan
door open . . . . . . . . . . . . . 71
71. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 with fan doors
open .
. . . . . . . . . . . . . . 72
72. Replacing the SAN Volume Controller
2145-CF8 cover . . . . . . . . . . . 73
73. Raising the SAN Volume Controller 2145-CF8
locking levers of the slide rails of the rack . . 73
74. SAN Volume Controller 2145-8G4 with the fan
door open . . . . . . . . . . . . . 74
75. SAN Volume Controller 2145-8F2 with the
access doors open . . . . . . . . . . 75
76. Left release button of a SAN Volume
Controller 2145-CF8 service controller . . . . 77
77. Service controller for the SAN Volume
Controller 2145-CF8 with attached USB cable . 77
78. SAN Volume Controller 2145-CF8 service
controller . . . . . . . . . . . . . 78
79. Removing and replacing the USB cable in the
SAN Volume Controller 2145-CF8 service
controller .
. . . . . . . . . . . . 79
80. USB service-controller cable connected to the
disk controller and USB riser card in the SAN
Volume Controller 2145-CF8 .
. . . . . . 80
81. USB service-controller cable connector on the
USB riser card . . . . . . . . . . . 81
82. SAN Volume Controller 2145-8A4 service
controller release button . . . . . . . . 82
83. SAN Volume Controller 2145-8G4 service
controller release button . . . . . . . . 83
84. Removing the service controller from the SAN
Volume Controller 2145-8G4 . . . . . . . 83
85. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 with fan doors
open .
. . . . . . . . . . . . . . 84
86. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 service controller . 85
87. SAN Volume Controller 2145-CF8 service
controller . . . . . . . . . . . . . 86
88. Raising the SAN Volume Controller 2145-CF8
locking levers of the slide rails of the rack . . 87
89. SAN Volume Controller 2145-8A4 service
controller . . . . . . . . . . . . . 88
90. SAN Volume Controller 2145-8G4 service
controller . . . . . . . . . . . . . 89
91. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 service controller . 91
92. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 with fan doors
open .
. . . . . . . . . . . . . . 91
93. Power LED on the SAN Volume Controller
models 2145-CF8, 2145-8A4, 2145-8G4, and
2145-8F4 or 2145-8F2 operator-information
panel.
. . . . . . . . . . . . . . 93
94. SAN Volume Controller models 2145-CF8,
2145-8A4, 2145-8G4, and 2145-8F4 or 2145-8F2
power-control button .
. . . . . . . . 94
95. Locating the SAN Volume Controller 2145-CF8
memory modules . . . . . . . . . . 95
96. Locating the SAN Volume Controller 2145-8A4
memory modules . . . . . . . . . . 96
97. Locating the SAN Volume Controller 2145-8G4
memory modules . . . . . . . . . . 96
98. Locating the SAN Volume Controller 2145-8F2
or SAN Volume Controller 2145-8F4 memory
modules
. . . . . . . . . . . . . 97
99. Removing the memory modules . . . . . 98
100. Replacing a memory module. . . . . . . 99
101. SAN Volume Controller 2145-8A4 SATA disk
drive . . . . . . . . . . . . . . 100
102. Removing the SATA disk drive . . . . . 101
103. SAN Volume Controller 2145-4F2 disk drive
and front panel . . . . . . . . . . . 102
104. Attaching the rails to the SAN Volume
Controller 2145-4F2 disk drive . . . . . . 102
105. Boot drive for the SAN Volume Controller
2145-CF8 . . . . . . . . . . . . . 104
106. Drive-bay filler panel and disk-drive handle
for the SAN Volume Controller 2145-CF8 . . 104
107. Drive IDs for SAN Volume Controller
2145-CF8 . . . . . . . . . . . . . 105
108. SAN Volume Controller 2145-8A4 SATA disk
drive . . . . . . . . . . . . . . 106
109. Removing the SATA disk drive . . . . . 107
110. Drive-bay filler panel and disk-drive handle
for the SAN Volume Controller 2145-CF8 . . 108
111. Raising the SAN Volume Controller 2145-CF8
locking levers of the slide rails of the rack . . 109
vi
IBM SAN Volume Controller Hardware Maintenance Guide