IBM SAN Volume Controller, Hardware Maintenance Manual

Page: 93 / 334

5. Push the back rail bracket
1
(Figure 65) toward the front of the rail until it stops. The rail is now at
its shortest adjustment.
1
Latch-lever
2
Latch-lock
3
Back rail bracket
6. Place the front end of the left rail in the rack cabinet. Align the top of the front bracket
1
(Figure 66) with the required EIA marking that is on the rack.
1
Front bracket
2
Rack-mounting flange
3
Locating pins
Figure 65. Opening the back latch-lock carrier assembly
1
2
3
Figure 66. Installing the front end of the rail
Chapter 2. Removing and replacing parts
67