Attention:
v
If the uninterruptible power supply is cascaded from another uninterruptible power supply, the source
uninterruptible power supply must have at least three times the capacity per phase and the total
harmonic distortion must be less than 5%.
v
The uninterruptible power supply also must have input voltage capture that has a slew rate of no
more than 3 Hz per second.
Emergency power-off shutdown
The SAN Volume Controller and each uninterruptible power supply support emergency power-off (EPO)
shutdowns.
Handling static-sensitive devices
Ensure that you understand how to handle devices that are sensitive to static electricity.
Attention:
Static electricity can damage electronic devices and your system. To avoid damage, keep
static-sensitive devices in their static-protective bags until you are ready to install them.
To reduce the possibility of electrostatic discharge, observe the following precautions:
v
Limit your movement. Movement can cause static electricity to build up around you.
v
Handle the device carefully, holding it by its edges or frame.
v
Do not touch solder joints, pins, or exposed printed circuitry.
v
Do not leave the device where others can handle and possibly damage the device.
v
While the device is still in its antistatic bag, touch it to an unpainted metal part of the system unit for
at least two seconds. (This action removes static electricity from the package and from your body.)
v
Remove the device from its package and install it directly into your SAN Volume Controller, without
putting it down. If it is necessary to put the device down, place it onto its static-protective bag. (If your
device is an adapter, place it component-side up.) Do not place the device onto the cover of the SAN
Volume Controller or onto a metal table.
v
Take additional care when you handle devices during cold weather because heating reduces indoor
humidity and increases static electricity.
Environmental notices and statements
You must become familiar with the environmental notices and statements.
The following topics describe the environmental notices and statements that are applicable to this
product.
Product recycling and disposal
Ensure that you are aware of the materials that must be recycled. Before using this information and the
product that it supports, read the
IBM Environmental Notices and User Guide
on the IBM Environmental
Notices CD.
Safety and environmental notices
xix
Summary of Contents for SAN Volume Controller
