IBM SAN Volume Controller, Hardware Maintenance Manual

Page: 52 / 334

2.
Install the L-shaped cable-management stop bracket, as shown by
1
in Figure 17 on the unattached
end of the support arm. Turn the bracket
2
to secure it to the support arm.
3. To attach the other side of the support arm to the backside of the slide rail, push the blue latch on the
cable-support-arm stop bracket, as shown by
1
in Figure 18, to slide the bracket
2
into the slide
rail.
2
svc_bb1ka025
1
2
Figure 16. Rack rear: Attaching the SAN Volume Controller 2145-CF8 cable-management support arm
svc_bb1ka030
1
2
Figure 17. Rack rear: Installing the SAN Volume Controller 2145-CF8 cable-management stop bracket
svc_bb1ka035
1
2
Figure 18. Attaching the free end of the SAN Volume Controller 2145-CF8 support arm
26
IBM SAN Volume Controller Hardware Maintenance Guide