Notes:
1. Increasing density may make documents appear darker; however, it also uses
more toner, which decreases the number of images you can expect to print with
your toner cartridge.
2. Decreasing toner density may improve image clarity.
3. Density has little effect on solid area density (large black areas), unless
QUALITY is set to ECONO on the Config Menu.
4. The DENSITY item in the Paper Menu always controls the printer density
setting. You cannot use a printer driver to change the density setting.
Changing the Power Savings (Sleep Mode) Interval
Situation: You want to increase or decrease the interval before your printer goes
into power-saving mode. In this mode, the printer powers down most of its systems.
This saves energy, but also requires extra time to warm up when the next print is
requested. The default is 30 minutes.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see CONFIG MENU in the display.
3. Press the Item key until you see PWRSAV=30* in the display. (If this value has
already been changed, a number other than 30 will appear in the display.)
4. Press the Value key until you see the value (number of minutes) you want to
assign to the power-saver feature. Select OFF if you never want the printer to
go into power-saving mode.
5. Press the Enter key to select the new power-savings value. An asterisk (*)
appears next to the value, showing that it is active.
6. To restore the printer to READY status, press the Online key.
Changing the Language Shown on the Display Panel
Situation: You want to display operator panel messages and menus in a language
other than English.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Shift and Menu keys at the same time. You see LANGUAGE MENU.
3. Press the Item key. LANG=ENGLISH* appears as the first menu item unless
the language has already been changed.
4. Press the Value key until you see the language you want to select.
5. Press the Enter key. An asterisk (*) appears next to the language, showing that
it is active.
6. To restore the printer to READY status, press the Online key.
Chapter 3. Using the Operator Panel
23
Summary of Contents for InfoPrint 20
