IBM InfoPrint 20 User Manual Download Page 121

Page: 121 / 206

Checking the Power Cord

IBM recommends checking the printer plug approximately once a month.

1. Power off the printer.

2. Unplug the power cord from the printer and the wall socket.

3. Check the plugs of the power cord for heat damage, rust, bent prongs or other

damage.

4. Verify that the plug and AC outlet are free of accumulated dust.

5. Check the power cord for cracks, tears, abrasion or other damage.

6. Plug the power cord firmly into the wall socket.

7. Plug the power cord firmly into the AC outlet.

Note: Always make sure you leave enough room around all power plugs for you to

easily disconnect the printer power cord.

Chapter 7. Maintaining the Printer

111

Summary of Contents for InfoPrint 20















































































































































































































Search results

Summary of Contents for InfoPrint 20

Reviews:

Related manuals for InfoPrint 20

Brands by name

Popular brands

IBM InfoPrint 20, User Manual

Search results

Summary of Contents for InfoPrint 20

Reviews:

Related manuals for InfoPrint 20

Brands by name

Popular brands