IBM InfoPrint 20 User Manual Download Page 126

Page: 126 / 206

4. Position the hard drive with the four screws facing the four matching holes on

the controller card.

5. Push the hard drive firmly into the card and slide it down toward the connector

at the bottom of the controller card. The pins on the hard drive should be firmly
seated in the connector slots.

6. Reinstall the side cover. Follow the procedure “Reinstalling the Side Cover”.

Reinstalling the Side Cover

Use the following procedure to reinstall the side cover:

1. Insert the hooks (1) at the bottom of the side cover into the holes (2) at the

bottom of the printer frame.

2. Guide the tabs (3) into the slots (4) in the top cover and slide the side cover

toward the front of the printer.

116

InfoPrint 20: User’s Guide -- Web Version

Summary of Contents for InfoPrint 20















































































































































































































Search results

Summary of Contents for InfoPrint 20

Reviews:

Related manuals for InfoPrint 20

Brands by name

Popular brands

IBM InfoPrint 20, User Manual

Search results

Summary of Contents for InfoPrint 20

Reviews:

Related manuals for InfoPrint 20

Brands by name

Popular brands