IBM InfoPrint 20, User Manual

Page: 61 / 206

c. Press the Enter key to select the new setting. An asterisk appears next to
the value, showing that it is active.
6. Specify the form on the IPDS Menu.
a. Press the Menu key until you see IPDS MENU in the display.
b. Press the Item key until you see CUSTOM FORM=n* in the display.
c. Press the Value key until you see CUSTOM FORM=1* in the display.
d. Press the Enter key to select the new setting. An asterisk appears next to
the value, showing that it is active.
7. To restore the printer to READY status, press the Online key.
Notes:
1. Custom forms wider than 297 mm (11.69 in) cannot be offset using the duplex
unit.
2. Custom forms can be printed only from the auxiliary tray. Set the AUXSIZE item
in the Paper Menu to UNIV for paper or UNI-ENV for envelopes. See “Loading
Custom Paper and Envelopes into the Auxiliary Tray” on page 40 for more
information.
Chapter 4. Paper Handling
51
|
|
|
|