IBM InfoPrint 20, User Manual

Page: 100 / 206

Ethernet Menu Item Value Description
NW FRAME AUTO*
ETH II
802.2
802.3
SNAP Selects the Netware frame type.
v
AUTO—the printer uses the frame type of the first frame it
receives.
v
ETHER II—the printer uses the Ethernet Standard Version 2
frame type.
v
802.2—the printer uses the IEEE 802.2 protocol.
v
802.3—the printer uses the IEEE 802.3 protocol.
v
SNAP—the printer uses the SNAP protocol.
Note: This menu item appears only when NETWARE is ON.
NETBIOS ON*
OFF Turns NetBIOS communications on or off.
v
ON—enables NetBIOS communications.
v
OFF—disables NetBIOS communications.
APPLETALK ON*
OFF Turns AppleTalk communications on or off.
v
ON—enables AppleTalk communications.
v
OFF—disables AppleTalk communications.
Coaxial SCS Menu
Use the Coaxial SCS Menu to define how the printer handles SCS data over the
coax attachment. The following table describes the settings you can change from
the Coaxial SCS Menu. An asterisk (*) next to a value in the table indicates the
factory default. The Coaxial SCS Menu appears only if you have the coax network
interface card installed.
Notes:
1. To select a new value, press the Enter key when the value is displayed in the
message display area. An asterisk (*) appears next to the value in the message
display area, indicating that it is now active.
2. Values set in print jobs override Coaxial SCS Menu values set at the printer.
3. For more information about configuring the coax attachment, see IBM Network
Printers: Twinax/Coax Configuration Guide.
4. If you are unfamiliar with using the operator panel to work with menus, please
read “Using the Operator Panel Keys” on page 16 and “Navigating Menus” on
page 17 before continuing.
90
InfoPrint 20: User’s Guide -- Web Version