IBM InfoPrint 20, User Manual

Page: 18 / 206

v
Height: 16.3 inches (413 mm)
In addition, make sure you leave enough room around the printer to access and
operate it, and make sure there is enough room around all power plugs for you to
easily disconnect the power cord. IBM recommends leaving at least 13.6 inches
(340 mm) in the back of the printer, 30.4 inches (760 mm) in the front of the printer,
8 inches (200 mm) on each side, and 16 inches (400 mm) above the printer.
Remove all items from the packing box including packaging pieces. Lift the printer
and place it on a flat surface. If any of the following items are missing, contact your
point of purchase:
v
IBM InfoPrint 20
v
500-sheet paper tray
v
Toner cartridge
v
The following documents: IBM InfoPrint 20: Quick Reference Card, IBM InfoPrint
20: Quick Setup Poster, and IBM InfoPrint 20: Safety and Warranty Information
v
CD-ROM
v
Power cord (in some countries the power cord needs to be ordered separately
and is shipped in a separate box)
Note: Save all packing materials in case you need to ship or store your printer.
Applying the Operator Panel Overlay
Important!
Some printers may have the overlay installed already. If yours does, skip this
procedure.
1. Peel the thin layer of protective plastic off the message display area.
2. Use a dry cloth or towel to remove dust from the operator panel.
8
InfoPrint 20: User’s Guide -- Web Version