IBM InfoPrint 1540 User Manual Download Page 96

Page: 96 / 166

Installing an option card

Installing options

Installing an option card

Warning:

Option cards are easily damaged by static electricity. Touch something metal such as the MFP frame
before you touch a memory card.

Note: You need a small Phillips screwdriver to attach the option card to the system board.

Remove the system board access panel. (See Accessing the MFP system board.)

Unpack the card. Save the packaging materials.

Align the connection points on the card with the connector on the system board, and push the card firmly into the
system board connector.

Insert the screws saved from the cover plate (or the extra screws shipped with the card).

Tighten the screws to secure the card.

Summary of Contents for InfoPrint 1540







































































































































































Search results

Summary of Contents for InfoPrint 1540

Reviews:

Related manuals for InfoPrint 1540

Brands by name

Popular brands

IBM InfoPrint 1540, User Manual

Search results

Summary of Contents for InfoPrint 1540

Reviews:

Related manuals for InfoPrint 1540

Brands by name

Popular brands