IBM InfoPrint 1540 User Manual Download Page 136

Page: 136 / 166

Hard disk wiping

134

Administrative support

Release the buttons when the touch screen blinks and is blank momentarily. Wait.

The

Config Menu

appears.

Touch the down arrow to scroll to

Disk Encryption

Touch the right arrow to enter the

Disk Encryption

menu.

Touch the right arrow next to

Disable

to decrypt the hard disk.

Contents will be lost. Continue?

appears.

Touch Yes to continue the process.

The Formatting Disk progress screen appears.

Warning:

Do not power off the MFP until the process completes.

When hard disk decryption is finished, touch Back to return to the

Config Menu

Touch Exit Config Menu to exit.

Hard disk wiping

Warning:

All resources on the hard disk will be irretrievably deleted. (Resources residing in flash memory or in
RAM remain unaffected.)

Note: This setting is only available on MFP models with an integrated internal hard disk drive.

Turn the MFP off. Wait 10 seconds.

Press and hold the 2 and 6 buttons on the numeric keypad while turning the MFP on.

Release the buttons when the touch screen blinks and is blank momentarily. Wait.

The

Config Menu

appears.

Touch the down arrow to scroll to

Wipe Disk

Touch the right arrow to enter the

Wipe Disk

menu.

Touch the right arrow next to

Wipe Disk now

to wipe the hard disk.

Contents will be lost. Continue?

appears.

Touch Yes to continue the process.

The Wiping Disk progress screen appears.

Warning:

Do not power off the MFP until the process completes.

When hard disk wiping is finished, touch Back to return to the

Config Menu

Touch Exit Config Menu to exit.

Summary of Contents for InfoPrint 1540







































































































































































Search results

Summary of Contents for InfoPrint 1540

Reviews:

Related manuals for InfoPrint 1540

Brands by name

Popular brands

IBM InfoPrint 1540, User Manual

Search results

Summary of Contents for InfoPrint 1540

Reviews:

Related manuals for InfoPrint 1540

Brands by name

Popular brands