IBM 7015-R30, Installation And Service Manual

Page: 224 / 300

Operator Guide
A-2
GROUP NO TEST TEST NO GROUP
05 DCB and Memory
test group 01
02
03
04
05
06
07
08
09
50
MM Data lines Test
MM Address lines Test
MM board dec. Test
MM Basic acc. Test
MM components Test
ECC component Test
ECC mechanism Test
Refresh mech. Test
ECC Data lines access. Test
MM Full Test (K/H)
06 Interrupt test group 01
02
03
04
05
06 BUMP to CPU interrupt Test
CPU to BUMP interrupt Test
UART to CPU interrupt Test
CPU to CPU interrupt Test
TOD to BUMP interrupt Test
MCA to CPU interrupt Test
11 Disk Accessibility
group 01
02
50
51
52
LSA/WSA SCSI basic Test*
LSA LAN basic Test*
Disk accessibility
LAN external*
Mouse Keyboard
*Test not available on all systems
20 Multi–processor
test group 01
02
03
04
05
06
07
08 Atomic instructions Test
Caches coherencies Test
DCB ports arbitration Test
TLB Mechanism Test
System IO share Test
Main memory share Test
Multi–resources sharing Test
Multi–processor full Test
Notes:
(*) For Manufacturing people only.
(**) For Field people only.
Some tests in this list are run only if an error is detected by the regular power-on self-tests
(POST). They are run as extended POST tests and include:
1. Multi-Resources Full Tests.
2. Main Memory Full Tests.
Some tests are only available through the Off Line Test Monitor under the maintenance
menu. They are not available and not run during Power On. They are as follows:
1. Asynch. lines L–B Test
2. BPP Ext. L–B Test
3. Printer Test
4. Dial-Out Test
5. Floppy Disk Ext. Test
6. MM Full Test
7. SCSI–D ext. Test.