IBM 7015-R30, Installation And Service Manual

Page: 64 / 300

2-30
Service Guide
3. Once you have selected the test groups, you can specify individual tests within a group.
For example, the following screen enables you to specify individual BUMP Quick IO
tests:
BUILD TEST LIST
GROUP 01 BUMP QUICK IO
TEST DESCRIPTION TEST DESCRIPTION
01 DEBUG LINE 02 S1 ASL (BUMP)
03 S2 ASL (REMOTE) 04 S3 ASL (SPECIFIC)
05 FLASH EPROM CONTENT 06 NOVRAM CONTENT
07 EPROM CONTENT 08 TOD
09 FLOPPY-DISK CONTROLLER 10 BPP REGISTERS
11 MISC REGISTERS 12 CPU ACCESS
13 VPD COHERENCY 50 ASL EXTERNAL L-B
51 BPP EXTERNAL L-B FULL 52 PRINTER
53 AUTODIAL 54 BPP EXTERNAL L-B
COMMANDS: nn> SELECT TEST
* > ADD ALL TEST TO TEST LIST
SELECT [x:exit]:
Attention: Do not run tests from the above list on items that do not exist on your system, a
failure indication results.
4. Select a particular test by entering the test number. The selected test is included in the
list with default parameters.
Notes:
1. Use the slash ( / ) character to separate different tests. For example, enter
01/03
to specify tests 1 and 3 with default parameter values.
2. Use the
*
(asterisk) character to select all available tests.
3. Attempting to add tests to a full test list causes an error message to be displayed.