IBM 7015-R30, Installation And Service Manual

Page: 143 / 300

Removal and Replacement Procedures
4-21
Lithium Battery
Removal
CAUTION:
A lithium battery can cause fire, explosion, or a severe burn. Do not recharge,
disassemble, heat above 100
°
C (212
°
F), solder directly to the cell, incinerate, or
expose cell contents to water. Keep away from children. Replace only with the part
number specified for your system. Use of another battery may present a risk of fire
or explosion.
The battery connector is polarized; do not attempt to reverse the polarity.
Dispose of the battery according to local regulations.
1. Do the steps detailed in the removal procedure in “Operator Panel” on page 4-20.
2. Remove the two mounting screws and clamps attaching the top cover to the operator
panel assembly.
3. Rotate the front of the top cover upwards, and then remove the top cover.
Operator Panel
Assembly
Mounting
Screw
Top Cover
Mounting
Screw
Clamp
Clamp